Family-Run Manufacturer · Since 1969
Windows & Doors in South Dublin
South Dublin runs on period stock — Victorian and Edwardian red-brick in Rathmines and Rathgar, mid-century in Dundrum and Stillorgan, gracious Edwardian on Killiney Hill, sea-facing Victorian along Dún Laoghaire. Wright Windows is the Westmeath manufacturer of R9 Legacy composite flush-sash and Spitfire S-500 aluminium doors — the products this market actually buys.
- Made in Westmeath
- Under 1 Hr From The M50
- Sole Irish Spitfire Supplier
- Official R9 Legacy Supplier
South Dublin is the most architecturally layered market in the country. The 1860–1910 expansion of Victorian Dublin pushed the city south through Rathmines, Rathgar, Terenure, Ballsbridge and Donnybrook — two- and three-storey red-brick terraces with sash windows, corbelled brickwork, cast-iron railings, and over 200 Protected Structures on Dublin City’s Record. Rathmines alone earned the nickname “Dublin Belgravia”. Dundrum, Stillorgan, Foxrock and Blackrock added Edwardian and mid-century stock; Killiney, Dalkey and the Dún Laoghaire seafront carry Italianate Victorian, Edwardian mansions and refurbished period townhouses fetching anywhere from €1m to €3m+.
For a window manufacturer the implication is specific: South Dublin is mostly replacement work, mostly high-margin, and the spec almost always has to clear a conservation officer or sit happily on a protected façade. Wright manufactures the two products this market consistently picks — R9 Legacy composite flush-sash for period replacement, and Spitfire S-500 aluminium entrance doors for premium new and refurbished homes — alongside our full range of aluminium picture windows, lift-and-slide patio doors and aluclad bays. Made in Milltownpass, an hour from the M50.
~90 km
Milltownpass to the M50 — about 1 hour 10 via M4 / M50
From the factory at Junction 5 it’s a straight motorway run east on the M4, onto the M50 south for D6, D14, D16, D18 and the Dún Laoghaire–Rathdown corridor. The whole south Dublin belt sits inside a one-hour-fifteen window for site surveys and installation crews.
What We Install in South Dublin
Period replacement & premium refurbishment.
R9 Legacy in Rathmines, Rathgar, Terenure, Ranelagh, Phibsboro. The Victorian and Edwardian red-brick terraces along the Rathmines / Rathgar corridor are the textbook case for R9 Legacy. Composite flush-sash engineered to replicate 19th-century timber proportions, with U-values of 0.8 W/m²K and an envelope that survives conservation officer review. We’ve installed R9 on planning-controlled work and can supply the U-value certs, drawings and product specs for a Protected Structure submission.
Spitfire S-500 entrance doors in D18, Foxrock, Blackrock, Dalkey, Killiney. Wright is the sole Irish supplier of the Spitfire S-500 — the high-end aluminium entrance door specified for premium South Dublin refurbishments and new builds. Slim sightlines, true thermal break, multi-point locking standard, U-values down to 0.8 W/m²K. Pairs naturally with our aluminium picture-window and lift-and-slide patio ranges.
Aluminium & aluclad in Dundrum, Sandyford, Stillorgan, Goatstown. The mid-century and contemporary stock around Dundrum, Sandyford and Stillorgan typically calls for large-format aluminium — picture windows, tilt & turn, bi-fold or lift-and-slide doors. Aluclad is a regular pick where the brief asks for the warmth of timber inside and the weather resistance of aluminium outside.
Coastal-exposed sites — Dún Laoghaire, Sandycove, Dalkey, Killiney. Sea-facing properties on the Dún Laoghaire seafront and around Sandycove and Killiney Bay see real wind-driven rain. Aluclad and our aluminium ranges, both with proper thermal breaks, are the specification we recommend — with full U-value certification for SEAI Home Energy Grant support where eligible.
Browse The Range
Built for the South Dublin brief.
R9 Legacy
Composite flush-sash engineered to replicate 19th-century timber proportions — the right window for Rathmines, Rathgar, Terenure and the South City period stock. 0.8 W/m²K, conservation-friendly.
Explore R9 Legacy →Spitfire S-500
The premium aluminium entrance door specified for high-end South Dublin homes. Wright is the sole Irish supplier. Bespoke to 3m, U-values down to 0.8 W/m²K.
Explore Spitfire →Aluminium
Slim sightlines, large-format picture windows, lift-and-slide doors. The standard spec for contemporary refurbishments in Dundrum, Sandyford and Stillorgan. 0.8 W/m²K.
Explore Aluminium →Featured · South Dublin Flagship
Spitfire S-500 — Wright is the sole Irish supplier.
The S-500 is the high-end aluminium entrance door of choice for South Dublin’s most demanding briefs — D18 new builds, Foxrock and Killiney refurbishments, Dalkey period townhouses. True thermal break, multi-point locking standard, configurable to 3m, U-values down to 0.8 W/m²K. Wright is the only Irish company licensed to supply it.
Why South Dublin Chooses Wright
Four reasons our quote wins on the south side.
R9 Legacy for the protected stock
South Dublin has hundreds of Protected Structures and Architectural Conservation Areas. R9 Legacy is the original composite flush-sash — engineered for exactly this work, accepted on planning-controlled projects, with the U-value certs and drawings for a conservation officer submission.
Spitfire S-500 — only Irish supplier
The S-500 is the high-end entrance door specified across D18, Foxrock, Blackrock and Killiney refurbishments. Wright is the only Irish company licensed to supply it. If your architect has named the Spitfire, we’re the route.
Manufacturer, not reseller
Every product is built in Milltownpass — you’re not buying through a Dublin showroom reselling a UK system or a German marque. Cleaner margin, honest answers, traceable build from our factory.
Our own installation team
Named Wright crew — Austin, Max, Frank, Declan — with decades on South Dublin sites between them. Same people for survey, install and snag-list. After-sales handled by Donal in Milltownpass.
South Dublin Areas Covered
From D6 to the coast.
Postal districts and Dún Laoghaire–Rathdown neighbourhoods we routinely cover.
Postal Districts
- Dublin 6
- Dublin 6W
- Dublin 8
- Dublin 10
- Dublin 12
- Dublin 14
- Dublin 16
- Dublin 18
- Dublin 20
- Dublin 22
- Dublin 24
Neighbourhoods
- Rathmines
- Rathgar
- Terenure
- Ranelagh
- Ballsbridge
- Donnybrook
- Templeogue
- Churchtown
- Dundrum
- Sandyford
- Stillorgan
- Goatstown
- Foxrock
- Cabinteely
- Blackrock
- Dún Laoghaire
- Sandycove
- Glasthule
- Dalkey
- Killiney
- Shankill
- Clondalkin
- Tallaght
- Lucan
South Dublin FAQ
Common Questions
Do you cover the full South Dublin area — D6 through to Killiney?
Yes — we cover the southside postal districts (D6, D6W, D8, D10, D12, D14, D16, D18, D20, D22, D24) and the full Dún Laoghaire–Rathdown county including Blackrock, Foxrock, Stillorgan, Dún Laoghaire, Dalkey, Killiney and Shankill. About an hour’s drive from the factory via the M4 and M50.
Can you handle Protected Structure or ACA work in Rathmines, Rathgar or Terenure?
Yes — this is exactly what R9 Legacy was designed for. We’ve installed it on planning-controlled refurbishments in the South Dublin period belt and supply U-value certs, technical drawings and product specs to support a conservation officer or planning submission. Traditional sliding sash in uPVC, aluclad or solid timber is also available where a like-for-like profile is required.
Are you the Spitfire S-500 supplier for South Dublin?
Yes — Wright is the sole Irish supplier of the Spitfire S-500 aluminium entrance door. If your architect or designer has specified the S-500 for a Foxrock, Killiney, Dalkey or D18 project, we’re the route to it — manufactured to your dimensions, multi-point locking standard, U-values down to 0.8 W/m²K.
Do you do new builds in South Dublin?
Yes — new build is a steady share of what we do across Dublin, including the south Dublin premium segment. We supply main contractors and architects directly from spec stage, with aluminium, aluclad or uPVC to brief.
Are your windows SEAI-grant eligible in South Dublin?
Yes — our standard ranges comfortably beat the 1.4 W/m²K SEAI threshold (down to 0.7 W/m²K on triple-glazed uPVC and 0.8 W/m²K on R9 Legacy and aluminium). The grant is paid through an SEAI Registered Contractor; we’ll supply the U-value certs.
What Customers Say
Wright Windows on Google
Ready for a free South Dublin quote?
Period refurbishment in Rathmines, a Spitfire S-500 for a Foxrock new build, or aluclad for a sea-facing project in Killiney — tell us about the brief and we’ll come back with a measured quote.
Get a Free QuoteGet In Touch